Skip to main content

Thinkpad Edge E530 won't wake up from sleep

I recently purchased a Thinkpad Edge E530 laptop from Lenovo. I think it is great value. I ordered it with the default 2GB RAM and bumped it up to a nice pair of Kingston HyperX 4GB DDR3 RAM, bringing the total up to 8GB. The whole thing costs me only about S$600.

But there was only one problem with the laptop. It wouldn't wake up from sleep or hibernate properly. I have to force power off the machine and boot it up again after sleep. I tried everything. Updating the BIOS. Updating the drivers. Nothing worked. It was frustrating.

After a tedious round of elimination testing, the culprit was finally tracked down to a HDD caddy that I purchased from DealExtreme. This is one of those gadgets that lets you install another harddisk into your space-scarce laptop by using the slot reserved for the optical drive. I use it to add a 120GB SSD drive into the laptop and use it to run certain I/O intensive applications (eg. virtual machines).

As luck would have it, I chanced upon a discussion in NotebookReview.com that talks about this issue on another laptop (but also involves a HDD caddy). I am not particularly knowledgeable about the hardware details, but apparently one of the pins (diagnostic SATA pin) is wrongly connected to ground and needs to be disconnected.


I am not very good with the soldering iron, and anyway the pads are spaced too closely together for my meager soldering skill. So armed with a small tweezer and a sewing needle, I set about trying to destroy the pin in question. Thankfully the pin itself is rather thin, so it didn't take long. A couple of minutes later, I had a clean break.

I put everything back together and powered on the laptop. Taking in a deep breath, I click on "Sleep". Hurray! The red LED on the laptop started to pulse, which indicates it is sleeping. Pressing the power button brought the laptop back to life, just as it was intended to. I couldn't be happier! Thanks to the wonderful folks who shared this piece of knowledge!
Labels:

Comments

  1. Anonymous23 March 2013 at 18:20

    A lot of Lenovo Edge users seem to have this problem. I have a E430 and have the no awake from sleep issue. But I don't use the HDD Caddy. The error reports in Windows don't seem to shine much information on what is causing. I get the Kernel power shutdown error from doing a forced shutdown.
    But before that it records nothing to indicate the problem. I myself uninstalled much of the Think Advantage stuff like Power Manager. But that was a while ago. This problem has just started recently. I am perplexed??

    ReplyDelete

Post a Comment

Popular posts from this blog

Cooling mod for the X96 Air #2

Previously, I added a USB cooling fan to the X96 Air TV box . The problem with this mod is that the fan is always running, and it runs at full speed. Ideally, the fan should kick in only when the CPU temperature is above a certain threshold. It would be even better if there is a way to control the fan speed. Dan McDonald left me a comment pointing to his project on Github . He basically connected the fan to a USB relay that can be controlled by Python script. His project inspired me to make a similar mod that would make use of the spare D1 Mini boards I have lying around. The plan is to hook up the fan to a MOSFET (2N7000) and control it via PWM. Here's the very simple circuit: The code simply reads a single character from the serial port (0 - 9). 0 will turn the fan off, while 1 - 9 will generate a proportional PWM to drive the fan, with 1 being the lowest and 9 being the highest. Here's the Arduino code: #include <Arduino.h> void setup () { Serial . begin ( 9600 ...
1 comment
Read more

Installing and customizing CoreELEC in X96 Air

I previously installed CoreELEC on another TV Box ( Ugoos X3 Pro ), which unfortunately died after only 9 months during the summer (due to the unit overheating, which I learned is a common problem for cheap Android TV boxes). So this time I purchased a X96 Air  (4GB/32Gb) and had to do the whole thing again. So this is a note-to-self in case I ever have to install CoreELEC again on some other device. Installation of CoreELEC is simple enough by following this guide . Basically, it involves downloading and writing the firmware to a microSD card using usbimager . Then insert the microSD card, reset the unit and hold the reset until the logo appears. The unit will then proceed to boot into CoreELEC. First thing is to connect to WiFi, then enable SSH. This allows me to login via ssh and execute: ceemmc -x from the terminal. This writes CoreELEC to the built-in eMMC storage, after which I am able to remove the microSD card and reboot the unit into CoreELEC via the built-in sto...
Post a Comment
Read more

DC-DC Buck Stepdown Converter for ESP8266

I am working on a project that requires a step-down converter from 12V to 5V, that will then power a WeMOS D1 Mini. I saw this new mini buck converter based on the usual LM2596 MP2307 , so I thought I'd give it a try. Unfortunately, it didn't work. Although it is supposed to be able to supply up to 1.8A, the D1 Mini was not able to boot up. The 5V pin was being properly supplied, but the 3.3V pin measures at only ~1.3V. So I had to go back to my usual LM2596 module, which is much larger, but works to power the D1 Mini with a 12V source. Here's a great review of the mini buck converter I found while trying to figure out how to make it work. The fact that it has high quiescent current (~60mA) is also mentioned in a few other sources.
Post a Comment
Read more