Skip to main content

Make Google Chrome Portable the system default browser

Making Chrome Portable the system default browser turned out to be more complicated than I'd expected.

I am currently running Windows 7 x64. I first tried Change Default Browser, which seems to be the tool recommended by everybody, but that didn't work for some reason. I tried a few other methods, but none of them worked. Finally I found salvation in this discussion, in the last post made by jonasformolo.

What is needed is to created the chrome.reg file, then fire up the text editor and replace all occurrences of:

  D:\\Softwares\\Portable\\Extracted\\GoogleChromePortable\\GoogleChromePortable.exe

with the full path to Chrome Portable on your system (mind the double backslashes!). Finally double-click to enter it into the registry.

However, there is one additional and crucial step to take which is missing in the original instructions. Since you can't easily edit the value in:

  HKEY_LOCAL_MACHINE\SOFTWARE\Classes\GoogleChromePortableURL\shell\open\command

with a text editior (unless you have the unusual skill of being able to edit Unicode strings in pure hex), you need to fire up REGEDIT to change the path value.

Now run "Control Panel" and select "Default Programs". If you have done everything right so far, you should see this:



Now simply click on "Set this program as default", and Chrome Portable will be set as the system default browser.
Labels:

Comments

  1. Cristian Dragos18 October 2012 at 13:11

    thanks for sharing this... was exactly what I was looking for!
    I can confirm this method works also with X-Chromium.

    ReplyDelete
  2. Brian8 February 2013 at 12:00

    Thank you so much for the clear instructions! I can confirm this works for a single user on Windows 7 x64. I have yet to add my wife's account and am wondering if this will work under multiple account situations using different portable installations.

    ReplyDelete
  3. Anonymous26 February 2013 at 15:23

    thx!!! it worked

    ReplyDelete
  4. Anonymous21 November 2013 at 06:32

    Thanks :]

    Instead of the extra step to edit the hex() string in the registry I just replaced it in the file with non-hex():

    [HKEY_LOCAL_MACHINE\SOFTWARE\Classes\GoogleChromePortableURL\shell\open\command]
    ""="\"B:\\PortableApps\\GoogleChromePortable\\GoogleChromePortable.exe\" -url \"%1\""

    ReplyDelete
  5. Unknown9 January 2015 at 09:15

    Awesome! It works fine.

    ReplyDelete
  6. XPloRR12 November 2015 at 13:48

    This comment has been removed by the author.

    ReplyDelete
  7. XPloRR12 November 2015 at 13:49

    Works for Chromium Portable as well, but you should also change the path to the icon manually! ;-)

    ReplyDelete
  8. Peter_Webfan15 January 2016 at 10:43

    Thanks that works great :) and thanks for the coment from @altendky :)

    ReplyDelete

Post a Comment

Popular posts from this blog

Cooling mod for the X96 Air #2

Previously, I added a USB cooling fan to the X96 Air TV box . The problem with this mod is that the fan is always running, and it runs at full speed. Ideally, the fan should kick in only when the CPU temperature is above a certain threshold. It would be even better if there is a way to control the fan speed. Dan McDonald left me a comment pointing to his project on Github . He basically connected the fan to a USB relay that can be controlled by Python script. His project inspired me to make a similar mod that would make use of the spare D1 Mini boards I have lying around. The plan is to hook up the fan to a MOSFET (2N7000) and control it via PWM. Here's the very simple circuit: The code simply reads a single character from the serial port (0 - 9). 0 will turn the fan off, while 1 - 9 will generate a proportional PWM to drive the fan, with 1 being the lowest and 9 being the highest. Here's the Arduino code: #include <Arduino.h> void setup () { Serial . begin ( 9600 ...
1 comment
Read more

Installing and customizing CoreELEC in X96 Air

I previously installed CoreELEC on another TV Box ( Ugoos X3 Pro ), which unfortunately died after only 9 months during the summer (due to the unit overheating, which I learned is a common problem for cheap Android TV boxes). So this time I purchased a X96 Air  (4GB/32Gb) and had to do the whole thing again. So this is a note-to-self in case I ever have to install CoreELEC again on some other device. Installation of CoreELEC is simple enough by following this guide . Basically, it involves downloading and writing the firmware to a microSD card using usbimager . Then insert the microSD card, reset the unit and hold the reset until the logo appears. The unit will then proceed to boot into CoreELEC. First thing is to connect to WiFi, then enable SSH. This allows me to login via ssh and execute: ceemmc -x from the terminal. This writes CoreELEC to the built-in eMMC storage, after which I am able to remove the microSD card and reboot the unit into CoreELEC via the built-in sto...
Post a Comment
Read more

Cooling mod for the X96 Air

I realized after my Ugoos box died that overheating is a big problem with cheap Android TV boxes. A teardown of the Ugoos box shows that it does not have any heatsink or fan at all!  The X96 Air does have a heatsink, but the heatsink is located at the bottom of the casing with no ventilation. In this default configuration, with the ambient room temperature at 25c and playing a 1080p video, I was seeing the CPU temperature at 67c. I drilled a couple of holes at the bottom of the casing. The CPU temperature fell to 59c with the box raised about 2cm with plastic blocks. I retrieved an old 5V laptop fan: Then cut and strip away a spare USB cable: Solder the red and black wires on the fan and the cable: Secure the fan to the bottom of the casing with double-sided tape, then plug the fan into the box's USB connector. Here's a view of the box with some 3D-printed risers installed at the bottom to give the mounted fan sufficient clearance: The CPU now runs at 43c, a huge drop from the ...
2 comments
Read more