Skip to main content

Hacking an analog clock to sync with NTP - Part 4

Assuming the jumper wires from the clock are connected to pins D1 and D2 on the ESP-12, the following Arduino sketch will make it function as a normal clock that ticks every second:

 1
 2
 3
 4
 5
 6
 7
 8
 9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
tickPin = D1;
os_timer_t secTimer;

// Triggered by system timer every second
void timerCallback(void *pArg) {
  tickOccured = true;
}

void setup() {
  // Setup GPIO outputs
  pinMode(D1, OUTPUT);
  pinMode(D2, OUTPUT);
  digitalWrite(D1, LOW);
  digitalWrite(D2, LOW);

  // Start system timer which triggers every second
  os_timer_setfn(&secTimer, timerCallback, NULL);
  os_timer_arm(&secTimer, 1000, true);
}

void loop() {
  if (tickOccured) {
    tickOccurred - false;
    tickPin = (tickPin == D1 ? D2: D1);
    digitalWrite(tickPin, HIGH);
    delay(100);
    digitalWrite(tickPin, LOW);
    delay(100);
  }  
  delay(250);
}

To be continued...

Labels:

Comments

  1. Stephen18 November 2016 at 17:54

    You refer to D1 & D2 on your board, however I'm having trouble translating that to a normal ESP-12. Could you tell me which pins you have defaulted to using this diagram?

    http://simba-os.readthedocs.io/en/latest/_images/esp12e-pinout.png

    ReplyDelete
    Replies
    1. Random Sequence21 November 2016 at 19:15

      From this link:

      http://www.esp8266.com/viewtopic.php?f=21&t=1388

      I believe D1 = IO14, D2 = IO12

      Delete
  2. Rob De Almeida27 November 2016 at 13:05

    Thanks for sharing! I'm using this for an art project at the FB HQ.

    A few comments:

    Line 23 should be: tickOccurred = false;

    And in some places of the code there's a typo — you use "tickOccured" instead of "tickOccurred".

    ReplyDelete
    Replies
    1. Random Sequence29 November 2016 at 01:47

      Thanks for pointing out the spelling error. I have corrected it in the Github repo.

      Delete

Post a Comment

Popular posts from this blog

Hacking an analog clock to sync with NTP - Part 5

This is how it looks after I have put everything together. The Arduino sketch is available here . The 2 jumper wires soldered to the clock mechanism are connected to pins D0 and D1 on the ESP-12 (in any order). When the device first boots up, it presents an access point which can be connected to via the PC or smartphone. Once connected, the captive portal redirects the web browser to the configuration page:     A custom field has been added to the WiFi configuration page to enter the current clock time in HHMMSS format. Try to set the clock time to as close to the current time as possible using the radial dial at the back of the clock so the clock will have less work to do catching up. In the config page, the HTML5 Geolocation API is also used to obtain your current location (so if your web browser asks if you would like to share your location, answer "yes"). This is then passed to the Google Time Zone API to obtain the time and DST offset of your time z...
23 comments
Read more

Cooling mod for the X96 Air #2

Previously, I added a USB cooling fan to the X96 Air TV box . The problem with this mod is that the fan is always running, and it runs at full speed. Ideally, the fan should kick in only when the CPU temperature is above a certain threshold. It would be even better if there is a way to control the fan speed. Dan McDonald left me a comment pointing to his project on Github . He basically connected the fan to a USB relay that can be controlled by Python script. His project inspired me to make a similar mod that would make use of the spare D1 Mini boards I have lying around. The plan is to hook up the fan to a MOSFET (2N7000) and control it via PWM. Here's the very simple circuit: The code simply reads a single character from the serial port (0 - 9). 0 will turn the fan off, while 1 - 9 will generate a proportional PWM to drive the fan, with 1 being the lowest and 9 being the highest. Here's the Arduino code: #include <Arduino.h> void setup () { Serial . begin ( 9600 ...
1 comment
Read more

Installing and customizing CoreELEC in X96 Air

I previously installed CoreELEC on another TV Box ( Ugoos X3 Pro ), which unfortunately died after only 9 months during the summer (due to the unit overheating, which I learned is a common problem for cheap Android TV boxes). So this time I purchased a X96 Air  (4GB/32Gb) and had to do the whole thing again. So this is a note-to-self in case I ever have to install CoreELEC again on some other device. Installation of CoreELEC is simple enough by following this guide . Basically, it involves downloading and writing the firmware to a microSD card using usbimager . Then insert the microSD card, reset the unit and hold the reset until the logo appears. The unit will then proceed to boot into CoreELEC. First thing is to connect to WiFi, then enable SSH. This allows me to login via ssh and execute: ceemmc -x from the terminal. This writes CoreELEC to the built-in eMMC storage, after which I am able to remove the microSD card and reboot the unit into CoreELEC via the built-in sto...
Post a Comment
Read more