Skip to main content

Looking for the perfect car MP3 player/FM transmitter

I have bought quite a number of car MP3 player/FM transmitters from DealExtreme and other similar websites.


A car MP3 player/FM transmitter is a device that takes a SDHC memory card or a USB memory stick and plugs into the car cigarette lighter socket. It plays the MP3 files stored on the memory card/stick and transmits that as FM signal to be picked up and played by the car stereo.

It is a nifty and convenient device because not all car stereo can play MP3 files, or be able to accept a memory card or stick. Also such a device is very portable. You can simply plug it into any vehicle eg. a company car and it will play all your favorite music.

Other alternatives exist eg. bluetooth, but they are simply not as straightforward and universal as this solution. After all, you'd be hard-pressed to find a car without a cigarette lighter plug.

The perfect car MP3 player/FM transmitter should have the following characteristics/features:

  1. Emits strong FM signal
  2. Remembers last FM frequency used
  3. Remembers last MP3 file played
  4. Remembers position of last MP3 file played
  5. Supports Unicode font on LCD display
  6. Body of memory card should not stick out when plugged in
1 and 3 are pretty much essential for the device to be useful. Unfortunately I have had to throw at least .a few devices away right upon arrival because they were lacking one or both of these features.

2 and 4 are good-to-have features (some may even consider them essential). 2 can be overcome by setting the car stereo to the default frequency, but sometimes you need to change the default frequency on the device because of interference, and having to do that during every cold start gets old after a while.

4 should be quite easy to do (just a little extra memory to store the last play position), but surprisingly I have not seen any device that has this feature! Either there is some unknown technical barrier to implementing this feature, or Chinese manufacturers are .too stingy to spend a few more cents to do so.

5 is a nice-to-have, since none of my Mandarin songs have their ID3 displayed correctly. On the other hand, this is understandable because it will probably add a lot to the production cost to embed a Unicode font into such a tiny device.

6 is simply a design issue. Half of the devices have it right, others have the memory card sticking out so badly I wonder what the designers were thinking.

I have yet to find my perfect car MP3 player/FM transmitter. I have bought at least a dozen such devices now, and none of them have all of 1,2,3 implemented, not to mention the others. The local Chinese OEM devices sold in Oz stores are not .much better.

Anyway, if you know of the perfect car MP3 player/FM transmitter, please leave me a comment. I am willing to pay a premium for such a device, but I am tired of buying one device after another and being disappointed over and over again...


Labels:

Comments

  1. Unknown10 April 2016 at 13:39

    you ever find one that met conditions 1 - 3? I did with the Soundfly but it's limited to 1999 songs.

    ReplyDelete
  2. Unknown27 October 2016 at 04:56

    Hi with the soundfly could you plug a phone into it play music through it

    ReplyDelete

Post a Comment

Popular posts from this blog

Update: Line adapter for Ozito Blade Trimmer

Update (Dec 2021): If you access to a 3D printer, I would now recommend this solution , which makes it super easy to replace the trimmer line. I have been using it for a few months now with zero issue.
5 comments
Read more

Cooling mod for the X96 Air

I realized after my Ugoos box died that overheating is a big problem with cheap Android TV boxes. A teardown of the Ugoos box shows that it does not have any heatsink or fan at all!  The X96 Air does have a heatsink, but the heatsink is located at the bottom of the casing with no ventilation. In this default configuration, with the ambient room temperature at 25c and playing a 1080p video, I was seeing the CPU temperature at 67c. I drilled a couple of holes at the bottom of the casing. The CPU temperature fell to 59c with the box raised about 2cm with plastic blocks. I retrieved an old 5V laptop fan: Then cut and strip away a spare USB cable: Solder the red and black wires on the fan and the cable: Secure the fan to the bottom of the casing with double-sided tape, then plug the fan into the box's USB connector. Here's a view of the box with some 3D-printed risers installed at the bottom to give the mounted fan sufficient clearance: The CPU now runs at 43c, a huge drop from the ...
2 comments
Read more

Installing and customizing CoreELEC in X96 Air

I previously installed CoreELEC on another TV Box ( Ugoos X3 Pro ), which unfortunately died after only 9 months during the summer (due to the unit overheating, which I learned is a common problem for cheap Android TV boxes). So this time I purchased a X96 Air  (4GB/32Gb) and had to do the whole thing again. So this is a note-to-self in case I ever have to install CoreELEC again on some other device. Installation of CoreELEC is simple enough by following this guide . Basically, it involves downloading and writing the firmware to a microSD card using usbimager . Then insert the microSD card, reset the unit and hold the reset until the logo appears. The unit will then proceed to boot into CoreELEC. First thing is to connect to WiFi, then enable SSH. This allows me to login via ssh and execute: ceemmc -x from the terminal. This writes CoreELEC to the built-in eMMC storage, after which I am able to remove the microSD card and reboot the unit into CoreELEC via the built-in sto...
Post a Comment
Read more