Skip to main content

Fast Diet - Hunger Pangs

When I am doing the Fast Diet, I frequently experience long periods of calm after a brief period of hunger pangs. It is as if the body has gone into hibernation, and I am left well alone to carry on with my daily routine. This is most apparent the morning after the diet day, when I could usually skip breakfast and have a late lunch.

I am reminded of what my diving instructor told me during training many years ago, that feelings of suffocation after a brief period under water is not due to lack of oxygen, but due to the buildup of carbon dioxide in the blood stream. This means you are not going to die (yet), and with knowledge you should  try to suppress the panic, remain calm and find a way out of the current situation to surface.

Hunger is mostly the same thing. It makes us uncomfortable and compels us to eat to rid ourselves of the discomfort. Worse, we have come to associate a lot of other feelings (both positive and negative) with eating. So we eat to make ourselves feel better, not necessarily when we are hungry. And this slowly builds up over the years in the world we live in today, where food is available in abundence 24x7.

I think occasional calories restriction (which is essentially what the Fast Diet is about) serves to remind ourselves that it is OK to feel hungry, that you don't have to eat at the first sign of hunger. It also serves to calibrate the "gauges" in our bodies and I think that's where the health benefits are derived.

Comments

Popular posts from this blog

Update: Line adapter for Ozito Blade Trimmer

Update (Dec 2021): If you access to a 3D printer, I would now recommend this solution , which makes it super easy to replace the trimmer line. I have been using it for a few months now with zero issue.

Line adapter for Ozito Blade Trimmer

This is an adapter for Ozito 18V battery trimmer (and possibly some Bosch trimmers as well) that uses a plastic blade for cutting. It lets you insert a 2.4mm trimmer line (about 8cm long) and use that for cutting. Simply cut a length of trimmer line and briefly heat up one end with a lighter so that a little bulb is formed. Then insert the trimmer line into the adapter and slot that into the trimmer as per normal. Make sure the trimmer line is not so long that it touches the safety guard. If that is the case, simply trim off any excess with a cutter or scissors. This part is best printed using PETG, which is a tougher and more flexible material. PLA is more rigid and breaks more easily. However, even with PETG, it will still break when it hits something really hard. Since this takes only 0.5m of material and 15 minutes to print, I will usually print a batch of nine at a time at very little cost. The blades that they sell do not break when it hits a hard object, but ...

Cooling mod for the X96 Air

I realized after my Ugoos box died that overheating is a big problem with cheap Android TV boxes. A teardown of the Ugoos box shows that it does not have any heatsink or fan at all!  The X96 Air does have a heatsink, but the heatsink is located at the bottom of the casing with no ventilation. In this default configuration, with the ambient room temperature at 25c and playing a 1080p video, I was seeing the CPU temperature at 67c. I drilled a couple of holes at the bottom of the casing. The CPU temperature fell to 59c with the box raised about 2cm with plastic blocks. I retrieved an old 5V laptop fan: Then cut and strip away a spare USB cable: Solder the red and black wires on the fan and the cable: Secure the fan to the bottom of the casing with double-sided tape, then plug the fan into the box's USB connector. Here's a view of the box with some 3D-printed risers installed at the bottom to give the mounted fan sufficient clearance: The CPU now runs at 43c, a huge drop from the ...