Skip to main content

Why do I get "Phone storage low" warnings on my Android device?

On an Android device, there is internal storage and external storage.

Internal storage is non-volatile NAND memory built into the device itself. It is also referred to as "ROM" on some spec sheets. Think of it as the "C:" drive on the PC where the Windows OS is located, and all other applications are installed. As such, not all internal storage is freely available to the user. After accounting for the system files (i.e. Windows OS), only the remainder can be used by applications. This free space is known as "Application storage" or "Phone storage". For example, the Google Nexus One has 512MB internal storage, but only 190MB phone storage.

External storage is the microSD card that you plug into the device. This can be as large as 32GB on most devices.

The "Phone storage low" warning occurs because earlier Android devices typically come with very low internal memory (192MB~512MB). Every application (and the data it creates) goes into phone storage and very soon it gets filled up, even though the external storage is practically untouched.

From Android 2.2 (Froyo), an application can write to a new API (A2SD) to let the OS move parts of it to external storage. However only parts of the application is moved, leaving substantial portions of it (libraries, data, cache) in phone storage. So over time, phone storage still gets clogged up.

The Apple iPhone decidedly does not have this problem because it comes with large internal storage (and does not support external memory cards anyway). With the latest Android devices (eg. Nexus S), Google seems to be moving in this direction as well. With 8 or 16GB of internal storage, phone storage low warnings should be a thing of the past.

For older devices, there are a few workarounds which I will explore in later posts. They range from the simplest (running a simple command) to the most difficult (flashing a custom ROM). Alas, from a user's point of view, these workarounds do not help achieve the holy grail, which is fully automatic and transparent storage management. But they will have to do for those of us struggling with low phone storage.

Comments

Popular posts from this blog

Cooling mod for the X96 Air #2

Previously, I added a USB cooling fan to the X96 Air TV box . The problem with this mod is that the fan is always running, and it runs at full speed. Ideally, the fan should kick in only when the CPU temperature is above a certain threshold. It would be even better if there is a way to control the fan speed. Dan McDonald left me a comment pointing to his project on Github . He basically connected the fan to a USB relay that can be controlled by Python script. His project inspired me to make a similar mod that would make use of the spare D1 Mini boards I have lying around. The plan is to hook up the fan to a MOSFET (2N7000) and control it via PWM. Here's the very simple circuit: The code simply reads a single character from the serial port (0 - 9). 0 will turn the fan off, while 1 - 9 will generate a proportional PWM to drive the fan, with 1 being the lowest and 9 being the highest. Here's the Arduino code: #include <Arduino.h> void setup () { Serial . begin ( 9600 ...

Installing and customizing CoreELEC in X96 Air

I previously installed CoreELEC on another TV Box ( Ugoos X3 Pro ), which unfortunately died after only 9 months during the summer (due to the unit overheating, which I learned is a common problem for cheap Android TV boxes). So this time I purchased a X96 Air  (4GB/32Gb) and had to do the whole thing again. So this is a note-to-self in case I ever have to install CoreELEC again on some other device. Installation of CoreELEC is simple enough by following this guide . Basically, it involves downloading and writing the firmware to a microSD card using usbimager . Then insert the microSD card, reset the unit and hold the reset until the logo appears. The unit will then proceed to boot into CoreELEC. First thing is to connect to WiFi, then enable SSH. This allows me to login via ssh and execute: ceemmc -x from the terminal. This writes CoreELEC to the built-in eMMC storage, after which I am able to remove the microSD card and reboot the unit into CoreELEC via the built-in sto...

DC-DC Buck Stepdown Converter for ESP8266

I am working on a project that requires a step-down converter from 12V to 5V, that will then power a WeMOS D1 Mini. I saw this new mini buck converter based on the usual LM2596 MP2307 , so I thought I'd give it a try. Unfortunately, it didn't work. Although it is supposed to be able to supply up to 1.8A, the D1 Mini was not able to boot up. The 5V pin was being properly supplied, but the 3.3V pin measures at only ~1.3V. So I had to go back to my usual LM2596 module, which is much larger, but works to power the D1 Mini with a 12V source. Here's a great review of the mini buck converter I found while trying to figure out how to make it work. The fact that it has high quiescent current (~60mA) is also mentioned in a few other sources.